Search found 15 matches

by JanRigo
Mon Aug 03, 2020 10:04 am
Forum: SIMATIC system
Topic: CPU not in RUN
Replies: 4
Views: 1481

Re: CPU not in RUN

by JanRigo
Tue Mar 08, 2016 9:40 am
Forum: SIMATIC system
Topic: [?]: Kuka robot FB or FC STEP7 or TIA
Replies: 5
Views: 6632

Re: [?]: Kuka robot FB or FC STEP7 or TIA

Hello, I have a new project with a kuka robot. Does someone have to share a FB/FC in Step 7 or TIA to start and command a KUKA Robot? If is possible in english or french. I want to understand the logic. I know the signals for external (move_enable, drives_on, conf_mess,peri_rdy, etc..) but I want t...
by JanRigo
Tue Mar 08, 2016 9:38 am
Forum: SIMATIC system
Topic: Kuka KRC4
Replies: 2
Views: 5394

Re: Kuka KRC4

Hi! I'm new here. I would need to help with the interface between the S7 300 PLC (CPU317 2PN / DP) and the KUKA robot KRC4. It regards external automatic. (Like Start program, Stop, Enable servo motors, etc.) It would help me greatly if you already have someone like something created. I will be gra...
by JanRigo
Tue Jul 21, 2015 11:42 am
Forum: SIMATIC HMI
Topic: Problem with writing data on USB/SD card TP700
Replies: 6
Views: 9103

Re: Problem with writing data on USB/SD card TP700

I try this example and the same problem .... cannot find path ... error -2147024893

----------------------------------------------
Run-time error '-2147024893 (800070003)'
Automation Error
The system cannot find the path specified
----------------------------------------------
by JanRigo
Tue Jul 21, 2015 10:08 am
Forum: SIMATIC HMI
Topic: Problem with writing data on USB/SD card TP700
Replies: 6
Views: 9103

Re: Problem with writing data on USB/SD card TP700

this is some of examples like i try to define path .... Cesta = "\Storage Card USB" NazovSuboru = "GDI_" & SmartTags("DMC") & ".csv" If SmartTags("#OP302_HMI.Production.Reset_Req_Production") Then NazovSuboru = "GDI_" & SmartTags("DMC") & ".csv" End If or Cesta = "\Storage Card USB\" NazovSuboru = "...
by JanRigo
Tue Jul 21, 2015 10:06 am
Forum: SIMATIC HMI
Topic: Problem with writing data on USB/SD card TP700
Replies: 6
Views: 9103

Re: Problem with writing data on USB/SD card TP700

all its good with script, because i read INT like a breakpoint that means script its ok .... i have only problem with writing on USB/SD ...
by JanRigo
Tue Jul 21, 2015 7:37 am
Forum: SIMATIC HMI
Topic: Problem with writing data on USB/SD card TP700
Replies: 6
Views: 9103

Problem with writing data on USB/SD card TP700

Hi, Im finding solution for fixing problem with writing data to .csv on USB or SD card with TP700 comfort panel. I prepare script which was testing by simulation. It is working and writing data on hard drive to PC . When I modify script for TP700 and after download the problem start. Via breakpoint ...
by JanRigo
Thu Jan 09, 2014 6:01 am
Forum: SIMATIC system
Topic: [?]: Simatic Microbox PC IPC427C WinAC RTX Error
Replies: 2
Views: 3576

[?]: Simatic Microbox PC IPC427C WinAC RTX Error

hello, I have a problem with SIMATIC Microbox PC IPC427C. Random system crashes and goes to blue screen. The worst part is that it erases the contents of the data block. description: *** Stop Detected Initiating RTX Shutdown **** RTX: Windows stopped - Calling RTSS shutdown handlers (please wait). W...
by JanRigo
Mon Sep 09, 2013 12:27 pm
Forum: Other PLC
Topic: [LINK]: PL7-2 Software
Replies: 39
Views: 55283

Re: [LINK]: PL7-2 Software

How to install PL7-2?? setup.exe writes: "This program cannot be run in a DOS session". I have win XP
by JanRigo
Wed Jun 05, 2013 8:53 am
Forum: PLC's books
Topic: Request: training material (video, pdf, ...) for SIMOTION
Replies: 0
Views: 9593

Request: training material (video, pdf, ...) for SIMOTION

I am looking for training material (video, pdf, ...) for SIMOTION
by JanRigo
Thu Sep 20, 2012 12:42 pm
Forum: SIMATIC system
Topic: [?]: SIWAREX via the SFC, for example?
Replies: 1
Views: 2270

[?]: SIWAREX via the SFC, for example?

How should I use the SFC communication for siwarex U?
Only the I/O communication is described everywhere.
I need to perform calibration via TP.
How can I read the real digits or zero the scales via the SFC, for example?
by JanRigo
Wed Sep 14, 2011 12:05 pm
Forum: SIMATIC system
Topic: [?]: How unPassword Sinumerik 802d ?
Replies: 2
Views: 2295

Re: [?]: How unPassword Sinumerik 802d ?

try "sunshine"
by JanRigo
Tue Aug 30, 2011 9:07 am
Forum: SIMATIC system
Topic: [?]: CP 343-1 v2.2 and S7 v5.4 SP5
Replies: 3
Views: 5569

Re: [?]: CP 343-1 v2.2 and S7 v5.4 SP5

i have it ..... :lol:

1. download HW update and save (C:HWUpdates )
2. edit hspcontents.xml and change tag "STEP7VERSION"
3. save and install this HWUpdates 8)
by JanRigo
Fri Aug 19, 2011 10:19 am
Forum: SIMATIC system
Topic: [?]: CP 343-1 v2.2 and S7 v5.4 SP5
Replies: 3
Views: 5569

[?]: CP 343-1 v2.2 and S7 v5.4 SP5

Hi all, I have encountered the following problem: I have a project in S7 in which the card CP343-1 v2.2 is. The problem is that I do not have such a card in the HW catalogue and HW update did not help me. I have the same S7 version as in the computer on which the project was created. I was advised f...