Search found 48 matches
- Fri Dec 22, 2023 6:01 am
- Forum: Other HMI
- Topic: Request: Inductive Automation Ignition
- Replies: 33
- Views: 19787
Re: Request: Inductive Automation Ignition
Thank you very much.
- Thu Dec 21, 2023 7:19 am
- Forum: Other HMI
- Topic: Request: Inductive Automation Ignition
- Replies: 33
- Views: 19787
Re: Request: Inductive Automation Ignition
No, this is what I was talking about...
https://forum.inductiveautomation.com/t ... 6?u=zxcslo
https://forum.inductiveautomation.com/t ... 6?u=zxcslo
- Tue Dec 19, 2023 6:37 am
- Forum: Other HMI
- Topic: Request: Inductive Automation Ignition
- Replies: 33
- Views: 19787
Re: Request: Inductive Automation Ignition
Man, this is awesome...you're the king...
Only one thing... Version 8.1.35 has a serious bug...in system.tag.writeBlocking function...
Can you do 8.1.33, please?
Only one thing... Version 8.1.35 has a serious bug...in system.tag.writeBlocking function...
Can you do 8.1.33, please?
- Tue May 01, 2018 11:33 am
- Forum: Other HMI
- Topic: [LINK]: Symbol Factory .NET
- Replies: 15
- Views: 29656
- Thu Jan 25, 2018 5:26 pm
- Forum: Industrial network
- Topic: IWLAN ACCESS POINT SCALANCE W788-1PRO
- Replies: 7
- Views: 15344
Re: IWLAN ACCESS POINT SCALANCE W788-1PRO
http://s7detali.narod.ru/NET/Scalance_M875.html Open the web-based management of the SCALANCE M875. Enter the address https://192.168.1.1 in an internet browser. You are prompted to enter the user name and the password. Using factory settings are: User name: admin Password: scalance the default pas...
- Mon Nov 02, 2015 7:18 pm
- Forum: Industrial network
- Topic: IWLAN ACCESS POINT SCALANCE W788-1PRO
- Replies: 7
- Views: 15344
Re: IWLAN ACCESS POINT SCALANCE W788-1PRO
My AP's are now 3 years old. I ordered them by mistake. I needed them for europe, but I mixed the last 4 order digits (2AA0 (non US) vs 2AB0 (US)). In the manual from 11/2012 (62382125_PH_SCALANCE-W700-WBM_76.pdf) stays: 5.1.1 Changing device password Introduction Requirement Procedure When you log ...
- Mon Nov 02, 2015 6:29 am
- Forum: Industrial network
- Topic: IWLAN ACCESS POINT SCALANCE W788-1PRO
- Replies: 7
- Views: 15344
Re: IWLAN ACCESS POINT SCALANCE W788-1PRO
I'm sorry, but it isn't....
There are two kinds of AP's:
- one for use INSIDE USA (6GK5788-1AA60-2AB0)
- and one for use OUTSIDE OF USA (6GK5788-1AA60-2AA0)
For use OUTSIDE USA, user/password is : Admin, admin,
but for USA is not.
I've been looking for this for 3 years now, but no luck....
There are two kinds of AP's:
- one for use INSIDE USA (6GK5788-1AA60-2AB0)
- and one for use OUTSIDE OF USA (6GK5788-1AA60-2AA0)
For use OUTSIDE USA, user/password is : Admin, admin,
but for USA is not.
I've been looking for this for 3 years now, but no luck....
- Mon Oct 26, 2015 8:38 am
- Forum: Industrial network
- Topic: IWLAN ACCESS POINT SCALANCE W788-1PRO
- Replies: 7
- Views: 15344
IWLAN ACCESS POINT SCALANCE W788-1PRO
I have Siemens SCALANCE Access Point w788-1PRO for use in USA (6GK5788-1AA60-2AB0). https://mall.industry.siemens.com/mall/sl/si/Catalog/Product/6GK5788-1AA60-2AB0 Does anybody know the admin password? (which you can get only from Siemens support, if you are certified Siemens Integrator... (ev) ) Ap...
- Fri May 10, 2013 11:57 am
- Forum: Other HMI
- Topic: Request: Inductive Automation Ignition
- Replies: 33
- Views: 19787
Re: Request: Inductive Automation Ignition
Yes, but that 'version' is very limited. It's like turning one PC to operating panel.
- Thu Feb 21, 2013 11:45 am
- Forum: Other HMI
- Topic: Request: Inductive Automation Ignition
- Replies: 33
- Views: 19787
Re: Request: Inductive Automation Ignition
I have been testing this software now for quite a while and I must say that is very good. This month we'll start new project and I'll be using this Ignition software instead of Siemens WinCC. The support is great, either on the forum or telephone or email. Even the price is negotiable. :) There's a ...
- Thu Feb 21, 2013 11:33 am
- Forum: Other HMI
- Topic: Request: KEPServerEx V5.xxx
- Replies: 32
- Views: 68598
- Thu Nov 03, 2011 8:54 pm
- Forum: Other HMI
- Topic: [?]: KepWareEx 4.xx with Windows 7
- Replies: 10
- Views: 14181
Re: [?]: KepWareEx 4.xx with Windows 7
You must put the Computer ID to the keygen and you'll get Unlock code. Yoe get Computer ID in the Kepware screen, where you are asked to put the unlock code...
- Sun Oct 23, 2011 6:53 pm
- Forum: Other HMI
- Topic: [?]: KepWareEx 4.xx with Windows 7
- Replies: 10
- Views: 14181
Re: [?]: KepWareEx 4.xx with Windows 7
Use this version of Kepware... with this there is no problem in Win7 32-bit...
Link_is_Dead :(/305571341/K ... 00.465.rar
Link_is_Dead :(/305571341/K ... 00.465.rar
- Sun Oct 09, 2011 7:33 am
- Forum: Other HMI
- Topic: Request: Inductive Automation Ignition
- Replies: 33
- Views: 19787
Request: Inductive Automation Ignition
Have you seen this: http://www.inductiveautomation.com/scada-software ?
It's java web based scada for Windows and Linux. Looks very good. I have tried the demo (two hours limit, then must restart - reset the timer) and looks cool.
Now we must get the serial/activation crack...
It's java web based scada for Windows and Linux. Looks very good. I have tried the demo (two hours limit, then must restart - reset the timer) and looks cool.
Now we must get the serial/activation crack...
- Tue Nov 09, 2010 4:49 pm
- Forum: SIMATIC HMI
- Topic: [?]: Trigger event from VB.NET in WinCC Flexible
- Replies: 9
- Views: 9795
Re: [?]: Trigger event from VB.NET in WinCC Flexible
You're welcome.
- Tue Nov 09, 2010 9:46 am
- Forum: SIMATIC HMI
- Topic: [?]: Trigger event from VB.NET in WinCC Flexible
- Replies: 9
- Views: 9795
Re: [?]: Trigger event from VB.NET in WinCC Flexible
The way I see it, you have two options: - use (and buy license for) WinCC Flex OPC server - use standalone OPC server on PC (Kepware, Siemens NET OPC server, Matricon) to communicate directly to PLC In either case you need to buy some licences. Check the prices. I'm using OPC to access data in PLC's...
- Tue Nov 09, 2010 7:14 am
- Forum: SIMATIC HMI
- Topic: [?]: Trigger event from VB.NET in WinCC Flexible
- Replies: 9
- Views: 9795
- Mon Nov 08, 2010 5:25 pm
- Forum: SIMATIC HMI
- Topic: [?]: Trigger event from VB.NET in WinCC Flexible
- Replies: 9
- Views: 9795
Re: [?]: Trigger event from VB.NET in WinCC Flexible
As far as I understand, you have WinCC Flex running on PC. You don't need OPC XML Gateway. When you start the runtime of WinCC, the WinCC OPC server (it's also automatically installed, when you install WinCC Flex) is also started, if you define in your project in Device settings/Device settings 'Fun...
- Sun Nov 07, 2010 4:48 pm
- Forum: SIMATIC HMI
- Topic: [?]: OPC SERVER AND WINCC
- Replies: 2
- Views: 4045
Re: OPC SERVER AND WINCC
There is nothing to set. When runtime of WinCC is running, the WinCC OPC server is available on network. If you browse OPC servers from your client, you will see WinCC OPC server. WinCC OPC server only make all tags inside the WinCC available to other clients. You can not share the project, only the...
- Fri Nov 05, 2010 8:02 pm
- Forum: SIMATIC HMI
- Topic: [?]: Trigger event from VB.NET in WinCC Flexible
- Replies: 9
- Views: 9795
Re: [?]: Trigger event from VB.NET in WinCC Flexible
Where do you run WinCC Flex? On PC or on OP/MP panel? How do you read from Excel? Is WinCC pooling data from Excel or does Excel write to WinCC? I think something of ..... using internal tag in WinCC, which is updated/set to 1 from Excel. Then event from that tag (change value) will triger the readi...
- Tue Oct 26, 2010 5:03 pm
- Forum: SIMATIC system
- Topic: [?]: SAVE the actual value of DB's
- Replies: 8
- Views: 10538
Re: SAVE the actual value of DB's
When you are ONLINE in DB, just click icon for SAVE (upper left corner). It'll save the online values to the offline DB.Trafo wrote:Go ONLINE as a whole. Copy ONLINE DB's, paste them to OFFLINE.
- Sat Oct 16, 2010 7:55 am
- Forum: Other HMI
- Topic: [?]: KepWareEx 4.xx with Windows 7
- Replies: 10
- Views: 14181
Re: [?]: KepWareEx 4.xx with Windows 7
I have installed a Kepware OPC server V4.500.465 on several Windows 7 with no problems. - I always use Win7 Pro or Ultimate 32-bit - the user logged in Win7 must have admin rights - I always disable UAC - setup must be run with 'Run as Administrator' Once the OPC server is installed, I run it. I jus...
- Sat Oct 02, 2010 6:18 pm
- Forum: Other HMI
- Topic: [?]: KepWareEx 4.xx with Windows 7
- Replies: 10
- Views: 14181
Re: [?]: KepWareEx 4.xx with Windows 7
Yes, with no problem.
Why?
Why?
- Tue Jul 27, 2010 5:20 pm
- Forum: Other HMI
- Topic: [?]: How to bulid OPC Server with VB.Net
- Replies: 1
- Views: 2585
Re: How to bulid OPC Server with VB.Net
When you install Kepware OPC server, you get VB/VB.NET samples in "C:\Program Files\KEPServerEx\Examples\".
Why don't you look at these...
Regards...
Why don't you look at these...
Regards...
- Thu Jun 24, 2010 5:21 am
- Forum: SIMATIC HMI
- Topic: [?] Recognition of shared addresses PLC-HMI
- Replies: 3
- Views: 3586
Re: [?] Recognition of shared addresses PLC-HMI
Now I'm lost...
What do you mean by 'shared address'? I though that you mean MPI/DP address of HMI.
If you mean address of the tags(MW, DBW,...), that are shown on the HMI, then without good symbolic/comments in STEP7 program it'll be very difficult.
What do you mean by 'shared address'? I though that you mean MPI/DP address of HMI.
If you mean address of the tags(MW, DBW,...), that are shown on the HMI, then without good symbolic/comments in STEP7 program it'll be very difficult.
- Tue Jun 22, 2010 2:26 pm
- Forum: SIMATIC HMI
- Topic: [?] Recognition of shared addresses PLC-HMI
- Replies: 3
- Views: 3586
Re: [?] Recognition of shared addresses PLC-HMI
You can connect both (PLC and HMI) on MPI/DP network and then with PG/PC you will see, what addresses are on the network.
You know the address of PLC, so the other is HMI.
You know the address of PLC, so the other is HMI.
- Mon May 24, 2010 3:34 pm
- Forum: SIMATIC HMI
- Topic: [Request] RA faceplate builder V1.1 (WINCC Addon)
- Replies: 3
- Views: 6629
Re: [Request] RA faceplate builder V1.1 (WINCC Addon)
You can download from here: http://www.allottware.co.za/data/unfiled/apps/ It's called 'RA Add-On for WinCC v1.1' and inside you will found very good stuff for WinCC. My only regret is that he's stopped developing this few years ago. You can use it with WinCC v6, but is not completely compatible wit...
- Sun May 16, 2010 7:39 am
- Forum: SIMATIC system
- Topic: [?]: How can I use one button for start-stop in s7-300
- Replies: 4
- Views: 3843
Re: [?]: How can I use one button for start-stop in s7-300
I think this one is the shortest:
Code: Select all
U I1.0
FP M100.0
X Q5.0
= Q5.0
- Tue Sep 15, 2009 2:36 pm
- Forum: SIMATIC system
- Topic: [Scheme]: about S5 cable
- Replies: 5
- Views: 4078
Why don't you look at this:
http://www.traeger.de/simatic-s5-interf ... b-tty.html
I have used this S5 cable (I still have one) and also MPI/PPI cable from them.
Regards...
http://www.traeger.de/simatic-s5-interf ... b-tty.html
I have used this S5 cable (I still have one) and also MPI/PPI cable from them.
Regards...
- Mon Sep 14, 2009 11:28 am
- Forum: SIMATIC system
- Topic: [Scheme]: about S5 cable
- Replies: 5
- Views: 4078
- Sat Sep 12, 2009 6:32 pm
- Forum: SIMATIC system
- Topic: [Scheme]: about S5 cable
- Replies: 5
- Views: 4078
That's why you must NEVER connect cable, when your PC is on. You will damage COM port. Been there, done that... :? That's known fact by PC connection over COM port to S5 PLC. There is no problem, when you have original PG (programming device) from Siemens, because PG have this chip inside... Regards...
- Thu Aug 27, 2009 6:50 pm
- Forum: SIMATIC system
- Topic: [?]: Why ibaPDA can't connect to Kepware OPC Server?
- Replies: 1
- Views: 2410
When you put 'kepware 0x80040202' in Google you get:
http://www.kepware.com/Support_Center/FAQ_GenError.htm
LP
http://www.kepware.com/Support_Center/FAQ_GenError.htm
LP
- Mon Jun 15, 2009 5:30 pm
- Forum: Other HMI
- Topic: [LINK]: Symbol Factory .NET
- Replies: 15
- Views: 29656
Re: Demo mode only
Great. Now it's working.evg7777 wrote:ЗЫ: отпишитесь, что получилось...
Thank you very much.
Regards...
- Wed May 27, 2009 10:03 am
- Forum: SIMATIC HMI
- Topic: [?]: download to one of mp377 in the network
- Replies: 2
- Views: 2533
In order to download to HMI devices over different networks (MPI, PROFIBUS, ETHERNET) from one place (for example your PC/PG in your office is on ETHERNET, HMI device is on MPI or DP) you must configure ROUTING in Siemens PLC. http://support.automation.siemens.com/WW/view/en/32235096 That means, you...
- Wed May 27, 2009 9:45 am
- Forum: SIMATIC system
- Topic: [?]: S7 PLC<=> ISO on TCP/IP<=>PC VS/VB/C++/C#
- Replies: 4
- Views: 7149
I always use Kepware OPC server, because is much better than Siemens. On Kepware web site ( http://www.kepware.com/KEP_KB/default.asp?catId=60&submit=Go&ToDo=browse ) you will find everything you need (including examples) to make connections from VB6/2005 to OPC server. It is realy very simple. All ...
- Tue Apr 21, 2009 4:19 pm
- Forum: Other HMI
- Topic: [LINK]: Symbol Factory .NET
- Replies: 15
- Views: 29656
- Mon Apr 20, 2009 7:32 pm
- Forum: SIMATIC system
- Topic: [reLINK]: SIMATIC MicroComputing
- Replies: 2
- Views: 4805
This is from Computing documentation: ------------------------------------------------- To access an S7 system on an MPI or PROFIBUS network, use the formula wcS7=xx,a,b where xx is the node (MPI or DP) address a is the rack number b is the slot number (The longer legacy string S7DosIntfMPI=x,a,b is...
- Thu Apr 09, 2009 5:09 pm
- Forum: SIMATIC system
- Topic: [?]: S7 PLC<=> ISO on TCP/IP<=>PC VS/VB/C++/C#
- Replies: 4
- Views: 7149
- Fri Feb 06, 2009 5:41 pm
- Forum: Other HMI
- Topic: [?] Best webbased scada system?
- Replies: 5
- Views: 4906
Very, very, very slow....deymon wrote:http://support.progea.com/webclient/
- Tue Oct 28, 2008 1:07 pm
- Forum: SIMATIC HMI
- Topic: [?]: WinCC V7.0 is error with KepserverEX V4
- Replies: 5
- Views: 4726
- Tue Oct 28, 2008 6:40 am
- Forum: SIMATIC HMI
- Topic: [?]: WinCC V7.0 is error with KepserverEX V4
- Replies: 5
- Views: 4726
- Mon Oct 27, 2008 5:34 pm
- Forum: SIMATIC HMI
- Topic: [?]: WinCC V7.0 is error with KepserverEX V4
- Replies: 5
- Views: 4726
Try this...ngoc wrote:I can't connect Kepware KepserverEX V4 with WinCC V7.0 in OPC Channel.
Please, anybody help me
Thanks!
http://www.kepware.com/Support_Center/S ... _Guide.pdf
Works like a charm (also with WinCC v7.0).
LP
- Tue Sep 09, 2008 10:20 am
- Forum: SIMATIC HMI
- Topic: [?+]: OP77B to S7-300
- Replies: 6
- Views: 5525
Thanks for your help! I managed to DL project to OP. But now I can't DL project to OP again. I put it in Transfer mode, set PG/PC to the same network mode as OP, but WinCC Flex can't establish connection!??? I just remembered one thing: On the OP in the Control panel in Transfer Settings you must e...
- Mon Sep 08, 2008 6:18 pm
- Forum: SIMATIC HMI
- Topic: [?+]: OP77B to S7-300
- Replies: 6
- Views: 5525
Thanks for your help! I managed to DL project to OP. But now I can't DL project to OP again. I put it in Transfer mode, set PG/PC to the same network mode as OP, but WinCC Flex can't establish connection!??? This is probably because your PC/PG and OP have the same MPI/DP address. (1 is default for ...
- Wed Sep 03, 2008 4:07 pm
- Forum: SIMATIC HMI
- Topic: [?+]: OP77B to S7-300
- Replies: 6
- Views: 5525
First of all: you don't need to add anything (OP) in HW configuration or Netpro. All you need to do is config the OP in the Protool or WinCC Flexible: - give the OP profibus address - select network type: MPI or DP - select the same speed you have in HW configuration for profibus Transfer the config...
- Mon Nov 19, 2007 8:06 pm
- Forum: SIMATIC HMI
- Topic: [?]: Cannot down load to MP277
- Replies: 2
- Views: 3034
- Fri May 25, 2007 7:06 pm
- Forum: SIMATIC system
- Topic: [?]: about pg685...
- Replies: 4
- Views: 4425
- Sat Jan 20, 2007 1:17 pm
- Forum: SIMATIC HMI
- Topic: [?]: How invert Bit function in WinCC V6.0 SP4 ?
- Replies: 1
- Views: 3525