Search found 48 matches

by zxcslo
Fri Dec 22, 2023 6:01 am
Forum: Other HMI
Topic: Request: Inductive Automation Ignition
Replies: 32
Views: 19029

Re: Request: Inductive Automation Ignition

Thank you very much. (tyou)
by zxcslo
Thu Dec 21, 2023 7:19 am
Forum: Other HMI
Topic: Request: Inductive Automation Ignition
Replies: 32
Views: 19029

Re: Request: Inductive Automation Ignition

No, this is what I was talking about...
https://forum.inductiveautomation.com/t ... 6?u=zxcslo
by zxcslo
Tue Dec 19, 2023 6:37 am
Forum: Other HMI
Topic: Request: Inductive Automation Ignition
Replies: 32
Views: 19029

Re: Request: Inductive Automation Ignition

Man, this is awesome...you're the king... (clap) (tyou)

Only one thing... Version 8.1.35 has a serious bug...in system.tag.writeBlocking function...
Can you do 8.1.33, please?
by zxcslo
Thu Jan 25, 2018 5:26 pm
Forum: Industrial network
Topic: IWLAN ACCESS POINT SCALANCE W788-1PRO
Replies: 7
Views: 14977

Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

http://s7detali.narod.ru/NET/Scalance_M875.html Open the web-based management of the SCALANCE M875. Enter the address https://192.168.1.1 in an internet browser. You are prompted to enter the user name and the password. Using factory settings are: User name: admin Password: scalance the default pas...
by zxcslo
Mon Nov 02, 2015 7:18 pm
Forum: Industrial network
Topic: IWLAN ACCESS POINT SCALANCE W788-1PRO
Replies: 7
Views: 14977

Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

My AP's are now 3 years old. I ordered them by mistake. I needed them for europe, but I mixed the last 4 order digits (2AA0 (non US) vs 2AB0 (US)). In the manual from 11/2012 (62382125_PH_SCALANCE-W700-WBM_76.pdf) stays: 5.1.1 Changing device password Introduction Requirement Procedure When you log ...
by zxcslo
Mon Nov 02, 2015 6:29 am
Forum: Industrial network
Topic: IWLAN ACCESS POINT SCALANCE W788-1PRO
Replies: 7
Views: 14977

Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

I'm sorry, but it isn't....

There are two kinds of AP's:
- one for use INSIDE USA (6GK5788-1AA60-2AB0)
- and one for use OUTSIDE OF USA (6GK5788-1AA60-2AA0)

For use OUTSIDE USA, user/password is : Admin, admin,
but for USA is not.

I've been looking for this for 3 years now, but no luck.... :(
by zxcslo
Mon Oct 26, 2015 8:38 am
Forum: Industrial network
Topic: IWLAN ACCESS POINT SCALANCE W788-1PRO
Replies: 7
Views: 14977

IWLAN ACCESS POINT SCALANCE W788-1PRO

I have Siemens SCALANCE Access Point w788-1PRO for use in USA (6GK5788-1AA60-2AB0). https://mall.industry.siemens.com/mall/sl/si/Catalog/Product/6GK5788-1AA60-2AB0 Does anybody know the admin password? (which you can get only from Siemens support, if you are certified Siemens Integrator... (ev) ) Ap...
by zxcslo
Fri May 10, 2013 11:57 am
Forum: Other HMI
Topic: Request: Inductive Automation Ignition
Replies: 32
Views: 19029

Re: Request: Inductive Automation Ignition

Yes, but that 'version' is very limited. It's like turning one PC to operating panel.
by zxcslo
Thu Feb 21, 2013 11:45 am
Forum: Other HMI
Topic: Request: Inductive Automation Ignition
Replies: 32
Views: 19029

Re: Request: Inductive Automation Ignition

I have been testing this software now for quite a while and I must say that is very good. This month we'll start new project and I'll be using this Ignition software instead of Siemens WinCC. The support is great, either on the forum or telephone or email. Even the price is negotiable. :) There's a ...
by zxcslo
Thu Feb 21, 2013 11:33 am
Forum: Other HMI
Topic: Request: KEPServerEx V5.xxx
Replies: 32
Views: 67811

Re: Request: KEPServerEx V5.xxx

+1 :)
by zxcslo
Thu Nov 03, 2011 8:54 pm
Forum: Other HMI
Topic: [?]: KepWareEx 4.xx with Windows 7
Replies: 10
Views: 14082

Re: [?]: KepWareEx 4.xx with Windows 7

You must put the Computer ID to the keygen and you'll get Unlock code. Yoe get Computer ID in the Kepware screen, where you are asked to put the unlock code...
by zxcslo
Sun Oct 23, 2011 6:53 pm
Forum: Other HMI
Topic: [?]: KepWareEx 4.xx with Windows 7
Replies: 10
Views: 14082

Re: [?]: KepWareEx 4.xx with Windows 7

Use this version of Kepware... with this there is no problem in Win7 32-bit...

Link_is_Dead :(/305571341/K ... 00.465.rar
by zxcslo
Sun Oct 09, 2011 7:33 am
Forum: Other HMI
Topic: Request: Inductive Automation Ignition
Replies: 32
Views: 19029

Request: Inductive Automation Ignition

Have you seen this: http://www.inductiveautomation.com/scada-software ?

It's java web based scada for Windows and Linux. Looks very good. I have tried the demo (two hours limit, then must restart - reset the timer) and looks cool.
Now we must get the serial/activation crack... :wink:
by zxcslo
Tue Nov 09, 2010 9:46 am
Forum: SIMATIC HMI
Topic: [?]: Trigger event from VB.NET in WinCC Flexible
Replies: 9
Views: 9751

Re: [?]: Trigger event from VB.NET in WinCC Flexible

The way I see it, you have two options: - use (and buy license for) WinCC Flex OPC server - use standalone OPC server on PC (Kepware, Siemens NET OPC server, Matricon) to communicate directly to PLC In either case you need to buy some licences. Check the prices. I'm using OPC to access data in PLC's...
by zxcslo
Mon Nov 08, 2010 5:25 pm
Forum: SIMATIC HMI
Topic: [?]: Trigger event from VB.NET in WinCC Flexible
Replies: 9
Views: 9751

Re: [?]: Trigger event from VB.NET in WinCC Flexible

As far as I understand, you have WinCC Flex running on PC. You don't need OPC XML Gateway. When you start the runtime of WinCC, the WinCC OPC server (it's also automatically installed, when you install WinCC Flex) is also started, if you define in your project in Device settings/Device settings 'Fun...
by zxcslo
Sun Nov 07, 2010 4:48 pm
Forum: SIMATIC HMI
Topic: [?]: OPC SERVER AND WINCC
Replies: 2
Views: 4013

Re: OPC SERVER AND WINCC

There is nothing to set. When runtime of WinCC is running, the WinCC OPC server is available on network. If you browse OPC servers from your client, you will see WinCC OPC server. WinCC OPC server only make all tags inside the WinCC available to other clients. You can not share the project, only the...
by zxcslo
Fri Nov 05, 2010 8:02 pm
Forum: SIMATIC HMI
Topic: [?]: Trigger event from VB.NET in WinCC Flexible
Replies: 9
Views: 9751

Re: [?]: Trigger event from VB.NET in WinCC Flexible

Where do you run WinCC Flex? On PC or on OP/MP panel? How do you read from Excel? Is WinCC pooling data from Excel or does Excel write to WinCC? I think something of ..... using internal tag in WinCC, which is updated/set to 1 from Excel. Then event from that tag (change value) will triger the readi...
by zxcslo
Tue Oct 26, 2010 5:03 pm
Forum: SIMATIC system
Topic: [?]: SAVE the actual value of DB's
Replies: 8
Views: 10443

Re: SAVE the actual value of DB's

Trafo wrote:Go ONLINE as a whole. Copy ONLINE DB's, paste them to OFFLINE.
When you are ONLINE in DB, just click icon for SAVE (upper left corner). It'll save the online values to the offline DB.
by zxcslo
Sat Oct 16, 2010 7:55 am
Forum: Other HMI
Topic: [?]: KepWareEx 4.xx with Windows 7
Replies: 10
Views: 14082

Re: [?]: KepWareEx 4.xx with Windows 7

I have installed a Kepware OPC server V4.500.465 on several Windows 7 with no problems. - I always use Win7 Pro or Ultimate 32-bit - the user logged in Win7 must have admin rights - I always disable UAC - setup must be run with 'Run as Administrator' Once the OPC server is installed, I run it. I jus...
by zxcslo
Sat Oct 02, 2010 6:18 pm
Forum: Other HMI
Topic: [?]: KepWareEx 4.xx with Windows 7
Replies: 10
Views: 14082

Re: [?]: KepWareEx 4.xx with Windows 7

Yes, with no problem.

Why?
by zxcslo
Tue Jul 27, 2010 5:20 pm
Forum: Other HMI
Topic: [?]: How to bulid OPC Server with VB.Net
Replies: 1
Views: 2575

Re: How to bulid OPC Server with VB.Net

When you install Kepware OPC server, you get VB/VB.NET samples in "C:\Program Files\KEPServerEx\Examples\".
Why don't you look at these...

Regards...
by zxcslo
Thu Jun 24, 2010 5:21 am
Forum: SIMATIC HMI
Topic: [?] Recognition of shared addresses PLC-HMI
Replies: 3
Views: 3569

Re: [?] Recognition of shared addresses PLC-HMI

Now I'm lost... :?

What do you mean by 'shared address'? I though that you mean MPI/DP address of HMI.
If you mean address of the tags(MW, DBW,...), that are shown on the HMI, then without good symbolic/comments in STEP7 program it'll be very difficult. :(
by zxcslo
Tue Jun 22, 2010 2:26 pm
Forum: SIMATIC HMI
Topic: [?] Recognition of shared addresses PLC-HMI
Replies: 3
Views: 3569

Re: [?] Recognition of shared addresses PLC-HMI

You can connect both (PLC and HMI) on MPI/DP network and then with PG/PC you will see, what addresses are on the network.
You know the address of PLC, so the other is HMI.
by zxcslo
Mon May 24, 2010 3:34 pm
Forum: SIMATIC HMI
Topic: [Request] RA faceplate builder V1.1 (WINCC Addon)
Replies: 3
Views: 6595

Re: [Request] RA faceplate builder V1.1 (WINCC Addon)

You can download from here: http://www.allottware.co.za/data/unfiled/apps/ It's called 'RA Add-On for WinCC v1.1' and inside you will found very good stuff for WinCC. My only regret is that he's stopped developing this few years ago. You can use it with WinCC v6, but is not completely compatible wit...
by zxcslo
Sun May 16, 2010 7:39 am
Forum: SIMATIC system
Topic: [?]: How can I use one button for start-stop in s7-300
Replies: 4
Views: 3825

Re: [?]: How can I use one button for start-stop in s7-300

I think this one is the shortest:

Code: Select all

U I1.0 
FP M100.0 
X Q5.0 
= Q5.0
:lol:
by zxcslo
Tue Sep 15, 2009 2:36 pm
Forum: SIMATIC system
Topic: [Scheme]: about S5 cable
Replies: 5
Views: 4052

Why don't you look at this:

http://www.traeger.de/simatic-s5-interf ... b-tty.html

I have used this S5 cable (I still have one) and also MPI/PPI cable from them.

Regards...
by zxcslo
Mon Sep 14, 2009 11:28 am
Forum: SIMATIC system
Topic: [Scheme]: about S5 cable
Replies: 5
Views: 4052

Theoreticly maybe yes, but I wouldn't be so sure.
Specialy on laptops, where you can't replace the com port, when it's damaged.

regards...
by zxcslo
Sat Sep 12, 2009 6:32 pm
Forum: SIMATIC system
Topic: [Scheme]: about S5 cable
Replies: 5
Views: 4052

That's why you must NEVER connect cable, when your PC is on. You will damage COM port. Been there, done that... :? That's known fact by PC connection over COM port to S5 PLC. There is no problem, when you have original PG (programming device) from Siemens, because PG have this chip inside... Regards...
by zxcslo
Thu Aug 27, 2009 6:50 pm
Forum: SIMATIC system
Topic: [?]: Why ibaPDA can't connect to Kepware OPC Server?
Replies: 1
Views: 2391

When you put 'kepware 0x80040202' in Google you get:

http://www.kepware.com/Support_Center/FAQ_GenError.htm

LP
by zxcslo
Mon Jun 15, 2009 5:30 pm
Forum: Other HMI
Topic: [LINK]: Symbol Factory .NET
Replies: 15
Views: 29416

Re: Demo mode only

evg7777 wrote:ЗЫ: отпишитесь, что получилось...
Great. Now it's working. :D

Thank you very much.

Regards...
by zxcslo
Wed May 27, 2009 10:03 am
Forum: SIMATIC HMI
Topic: [?]: download to one of mp377 in the network
Replies: 2
Views: 2518

In order to download to HMI devices over different networks (MPI, PROFIBUS, ETHERNET) from one place (for example your PC/PG in your office is on ETHERNET, HMI device is on MPI or DP) you must configure ROUTING in Siemens PLC. http://support.automation.siemens.com/WW/view/en/32235096 That means, you...
by zxcslo
Wed May 27, 2009 9:45 am
Forum: SIMATIC system
Topic: [?]: S7 PLC<=> ISO on TCP/IP<=>PC VS/VB/C++/C#
Replies: 4
Views: 7115

I always use Kepware OPC server, because is much better than Siemens. On Kepware web site ( http://www.kepware.com/KEP_KB/default.asp?catId=60&submit=Go&ToDo=browse ) you will find everything you need (including examples) to make connections from VB6/2005 to OPC server. It is realy very simple. All ...
by zxcslo
Tue Apr 21, 2009 4:19 pm
Forum: Other HMI
Topic: [LINK]: Symbol Factory .NET
Replies: 15
Views: 29416

In my Visual Studio 2005 also don't work.
It's in DEMO mode and you can select only first symbol... :cry:
by zxcslo
Mon Apr 20, 2009 7:32 pm
Forum: SIMATIC system
Topic: [reLINK]: SIMATIC MicroComputing
Replies: 2
Views: 4785

This is from Computing documentation: ------------------------------------------------- To access an S7 system on an MPI or PROFIBUS network, use the formula wcS7=xx,a,b where xx is the node (MPI or DP) address a is the rack number b is the slot number (The longer legacy string S7DosIntfMPI=x,a,b is...
by zxcslo
Thu Apr 09, 2009 5:09 pm
Forum: SIMATIC system
Topic: [?]: S7 PLC<=> ISO on TCP/IP<=>PC VS/VB/C++/C#
Replies: 4
Views: 7115

Why can't you use OPC?
It's very simple to use OPC in VS6/2005/2008.

Another way is to use FETCH/WRITE connections on PLC side (if you don't need very quick connections - less than 100 ms).

I use both (OPC and FETCH/WRITE) and until now I didn't need more than 1460 byte's in one package...

Regards
by zxcslo
Fri Feb 06, 2009 5:41 pm
Forum: Other HMI
Topic: [?] Best webbased scada system?
Replies: 5
Views: 4886

Very, very, very slow....
by zxcslo
Tue Oct 28, 2008 1:07 pm
Forum: SIMATIC HMI
Topic: [?]: WinCC V7.0 is error with KepserverEX V4
Replies: 5
Views: 4687

ngoc wrote:Hi Anybody!
I setup KepserverEX V4.300.499.0-U and WinCC V7.0 again, but i can't connect KepServerEX and WinCC V7.0.
AnyBody help me. Thanks
Can you connect with OPC Scout to the Kepware server?

LP
by zxcslo
Tue Oct 28, 2008 6:40 am
Forum: SIMATIC HMI
Topic: [?]: WinCC V7.0 is error with KepserverEX V4
Replies: 5
Views: 4687

I would suggest to try first with the demo project, that came with the Kepware server (simulation, no real PLC).
If that don't work, that reinstall Kepware.

If you try with OPC Scout (from Kepware, fourth button from the right on the top), can you connect to the server?

LP
by zxcslo
Mon Oct 27, 2008 5:34 pm
Forum: SIMATIC HMI
Topic: [?]: WinCC V7.0 is error with KepserverEX V4
Replies: 5
Views: 4687

ngoc wrote:I can't connect Kepware KepserverEX V4 with WinCC V7.0 in OPC Channel.
Please, anybody help me
Thanks!
Try this...

http://www.kepware.com/Support_Center/S ... _Guide.pdf

Works like a charm (also with WinCC v7.0).

LP
by zxcslo
Tue Sep 09, 2008 10:20 am
Forum: SIMATIC HMI
Topic: [?+]: OP77B to S7-300
Replies: 6
Views: 5496

Thanks for your help! I managed to DL project to OP. But now I can't DL project to OP again. I put it in Transfer mode, set PG/PC to the same network mode as OP, but WinCC Flex can't establish connection!??? I just remembered one thing: On the OP in the Control panel in Transfer Settings you must e...
by zxcslo
Mon Sep 08, 2008 6:18 pm
Forum: SIMATIC HMI
Topic: [?+]: OP77B to S7-300
Replies: 6
Views: 5496

Thanks for your help! I managed to DL project to OP. But now I can't DL project to OP again. I put it in Transfer mode, set PG/PC to the same network mode as OP, but WinCC Flex can't establish connection!??? This is probably because your PC/PG and OP have the same MPI/DP address. (1 is default for ...
by zxcslo
Wed Sep 03, 2008 4:07 pm
Forum: SIMATIC HMI
Topic: [?+]: OP77B to S7-300
Replies: 6
Views: 5496

First of all: you don't need to add anything (OP) in HW configuration or Netpro. All you need to do is config the OP in the Protool or WinCC Flexible: - give the OP profibus address - select network type: MPI or DP - select the same speed you have in HW configuration for profibus Transfer the config...
by zxcslo
Mon Nov 19, 2007 8:06 pm
Forum: SIMATIC HMI
Topic: [?]: Cannot down load to MP277
Replies: 2
Views: 3016

You can download project to MP over 'routing'.
That means, that you must include your MP in the S7 project and configure it in the hardware configuration.
Then the CPU (PLC) will know, how to 'route' communication from TCP/IP to MPI.
You can read about 'routing' in the S7 documetation.

LP
by zxcslo
Fri May 25, 2007 7:06 pm
Forum: SIMATIC system
Topic: [?]: about pg685...
Replies: 4
Views: 4414

Cable for S5 100U is the same like for S5 115U, 95U...

Step5 v6.6 will not work, because there is no MS DOS, only old OS CP/M.
The last version for PG685 is v3.1.
by zxcslo
Sat Jan 20, 2007 1:17 pm
Forum: SIMATIC HMI
Topic: [?]: How invert Bit function in WinCC V6.0 SP4 ?
Replies: 1
Views: 3507

Public Function ToggleBit(InByte As Byte, Bit As Byte) As Byte

ToggleBit = InByte Xor (2 ^ Bit)

End Function